Crown 5-3/8" - 11
Crown 5-3/8" - 11
This concave 5-3/8" - 11 crown mould measures 5.359" wide by 1.250" thick and is milled from 6/4 lumber. The design consists of a notched stepped fillet top, a 3-3/4" radius cove consuming the center, and a 15/32" wide fillet located on the bottom. When installed, the height becomes 3-9/16", with a projection of 4". The spring angles are set at forty-three and forty-seven degrees to make the hold-down points on the same plane for milling.
Moulding Knife Calculator
Grade of Steel
Subtotal
+ Custom Moulding Template
Total (Template + 2 Knives)
V2+RW
chrome coated 72rc face, best seller,
great tool life
$0.00
$0.00
$0.00
Black Nitride
black nitride case hardened
72rc, medium size runs
$0.00
$0.00
$0.00
Endurance
chrome and diamond coated, longest
tool life
$0.00
$0.00
$0.00
Note: If you’re experiencing trouble printing to Full Scale, Go to File,
Print Preview. Change the “Shrink to Fit” option to 100%
Right Cutter Head
Thickness: 1.250
Depth of Cut: 0.946
Left Cutter Head
Thickness: 1.250
Depth of Cut: 1.068
Top Cutter Head
Width: 5.375
Depth of Cut: 0.733
Bottom Cutter Head
Width: 0.000
Depth of Cut: 0.000
Grades of Steel
Price Per Cutter Head - Includes Template & Two Knives
V2+RW
chrome coated 72rc face, best seller
great tool life
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
Black Nitride
black nitride case hardened 72rc
medium size runs
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
Endurance
chrome and diamond coated
longest tool life
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
© Copyright 1997 - 2024 Mirror Reflections Inc. All Rights Reserved.
