Crown 5-1/4" - 2

This prestigious 5-1/4" - 2 crown mould measures 5.250" width by .750" thickness, allowing a 5-1/2" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. This distinguished terminating profile comprises a 5-43/64" radius concave semicircle in the center. A half-round circle borders the cove merged with two different-sized fillets creating an ovolo and a 21/64" line segment on both the top left and bottom right side of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed. These specific angles lock in the height at 3-23/32" tall with a 3-23/32" projection across the top.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. In most of our crown, cove, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.