WM 45 Crown 5-1/4" - 16

This WM 45 crown mould 5-1/4" - 16 measures 5.250" in width by .687" in thickness. The ageless terminating profile contains a two-tangent radius cyma recta in the center. It's flanked by a 5/8" vertical segment on the top left with a 5/16" tall line below. The lower portion retains a 25/32" radius cove with a 13/32" broad segment on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees; these dedicated back bevels set the installed height at 4-11/64" tall with a projection of 3-3/16" wide. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 5-1/2" wide.

This template-ready CAD-generated dxf file (purchase in the link below) contains three skillfully drafted template designs for producing profile cutters for this creative pattern. All our innovative profiles have proven unbroken CNC tool paths, making your job effortless in production. The current combined high-speed steel knives & template prices are listed below for quoting purposes. On most of our crown designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of profiles.