Crown 5-1/4" - 12

This symmetrical 5-1/4" - 12 beveled crown mould measures 5.250" in width by .812" in thickness, allowing a 5-1/2" wide blank of four-quarter lumber for machining sprung (laying horizontally flat) on an industrial moulder. The attractive terminating profile comprises a 3/4" tall by 7/16" broad set of perpendicular lines on the top left. The bottom right corner is the opposite set of lines connected to the upper section by a 3-9/16" long splay-faced angled line. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 3-23/32" tall with a 3-23/32" projection across the top. We offer a few other profiles close to these dimensions for your review and consideration, crown 5.218" - 8, crown 5.312" - 6, crown 5.468" - 2 and crown mould 5.500" - 37.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. In most of our crown, cove, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.