Crown 5-3/16" - 2

This stylish 5-3/16" - 2 crown mould measures 5.187" wide by 1.000" thickness, necessitating the use of five-quarter lumber to be machined sprung (laying horizontally flat) on an industrial moulder. The decorative terminating profile is comprised of a 41/64" vertical line merged with a 3/8" wide by 15/32" tall perpendicular notch on the top left, connected to a 2-23/32" concave semicircular arc in the center, attached to a 3/8" wide by 23/32" tall square rabbet with a 1/2" flat line on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the exposed face side of the profile parallel to the wall and ceiling when installed, as well as set the oriented height at 4-3/32" tall with a projection of 3-3/16" across the top.