Crown 5-3/16" - 10

This distinguished 5-3/16" - 10 crown mould measures 5.182" wide by 1.062" thickness, necessitating the use of five-quarter lumber for machining sprung (laying horizontally flat) on a moulder. The elegant terminating profile is composed of a 13/32" tall by 3/16" broad perpendicular lines on the top left. It's connected to a 19/32" wide convex arc and a 3/16" wide sunk fillet that transitions into a 2-3/64" concave semicircle in the center, attached to a 13/64" wide fillet joined to two 3/8" tangent radiuses creating the ogee with a 7/16" broad flat line on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the exposed face side of the profile parallel to the wall and ceiling when installed, as well as set the oriented height at 3-15/16" tall with a projection of 3-3/8" wide.

Custom-made elegance is a phrase used to define the beauty, style, and artisanship of thousands of our moulding designs. Whether you own a recently built house or an older-style residence, we have the ability, knowledge, and experience to create visually stunning molding profiles that will complement the architectural decor of your elegant home or office.