Crown 5-3/16"

This engaging 5-3/16" crown mould measures 5.187" wide by .812" thickness, permitting the pattern to be milled sprung (laying horizontally flat) out of four-quarter lumber. The visually stunning supporting profile is composed of a 21/64" wide by 37/64" tall perpendicular line on the top left, joined to a shallow two tangent radius cyma reversa and a 3/16" wide horizontal fillet with a 1-1/2" concave semicircular arc in the center, connected to a 1/2" wide by 21/32" tall notch for inserting a piece of rope or dentil moulding, attached to a 47/64" radius ovolo flanked by both vertical and horizontal 3/16" line segments with a 19/64" flat fillet on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the exposed face side of the profile parallel to the wall and ceiling when installed, as well as set the oriented height at 4-3/32" tall with a projection of 3-3/16" across the top.

Be sure to check out a few other profile designs for different rooms in your beautifully stylish home, with over 15,000 patterns in our search by size moulding catalog there is something for everyone’s creative architectural style. Utilize our manufacturers map listed by states to help you locate a mill in your area to produce any of our attractive profiles.