Crown 5-1/8" - 3

This unique 5-1/8" - 3 crown mould measures 5.125" wide by 1.062" thickness, allowing milling from five-quarter lumber. The distinctive profile comprises a 1/32" wide by 1/4" tall squared lines on top, connected to a 21/64" radius arc joined to a 21/32" cavetto flanked by a small vertical and horizontal line, attached to a 57/64" tall vertical line at the high point of the design that transitions into an angled line segment with a teardrop semicircle, a 1" cove flanked by a vertical line and a 9/32" broad line is positioned at the bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 3-5/8" tall with a projection of 3-5/8" wide.