Crown 5" - 18

This striking 5" - 18 crown mould measures 5.000" wide by .875" thickness. The lovely design consists of a two tangent radius cyma recta in the center, connected to a 3/8" wide by 3/8" tall notch with a 3/8" tall vertical line at the top. The lower portion consists of a 3/8" radius ovolo attached to a 3/8" wide horizontal fillet at the bottom of the pattern. The spring angles are fixed at thirty-five and fifty-five degrees, these specific back bevel cutters set the installed height at 4" tall with a projection of 3" wide. We recommend a felt-lined pressure shoe to eliminate any unsightly burnish mark left on the face from holding down on the center bead in the design while milling.