Crown 4-7/8" - 9

This concave 4-7/8" - 9 terminating crown mould measures 4.852" wide by 1.000" thickness. The profile is comprised of a 3-5/64" radius cove in the center, attached to a 3/16" wide by 47/64" tall by 1/8" deep notched fillet with 1/8" edges on top, the bottom consists of a 1/8" horizontal segment joined to a 3/16" quarter round edge. The fixed spring angles are at thirty-six and fifty-four degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 4" tall with a 2-3/4" projection across the top. The pattern measures 4.852" in width by .937" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five-quarter lumber is 5-1/8" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.