Crown 4-3/4" - 8

This decorative 4-3/4" - 8 crown mould measures 4.750" wide by .937" thickness, enabling the pattern to be milled sprung (laying horizontally flat) out of five-quarter lumber. The embellished terminating profile is composed of a 7/32" vertical fillet joined to a 9/32" cove and a 3/32" broad line on the top left, merged with a 3/8" wide half circle and a 1/8" wide by 3/16" deep sunk fillet with a 2-29/64" concave semicircle in the center, attached to a 7/32" wide by 9/16" tall notch for applying a piece of rope, or other beautifying applied moulding, connected to a 13/64" wide by 3/32" tall perpendicular lines and an 11/64" cove with a 3/16" broad flat area on the bottom right side of the design. The spring angles are fixed at forty-five degrees, these explicit back bevels keep the inner portion of the profile parallel to the wall and ceiling when installed, they also set the positioned height at 3-3/8" tall with a projection of 3-3/8" wide.