Crown 4-3/4" - 18

This stylish 4-3/4" - 18 crown mould measures 4.750" wide by .750" thickness, allowing the pattern to be milled sprung (laying horizontally flat) from four-quarter lumber. The voguish supporting profile is composed of a 9/64" vertical line tangent to a 19/64" quarter round arc with a 1/4" tall drop in elevation on the top left, connected to an opulent two tangent radius cyma recta and 5/16" vertical line segment in the center, merged with a smaller decorative two tangent radius cyma recta on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the inner section of the profile parallel to the wall and ceiling when installed, as well as set the oriented height at 3-11/16" tall with a 3" wide projection.