Crown 4-3/4" - 17

This beautiful 4-3/4" - 17 ornate crown mould measures 4.750" wide by .750" thickness, permitting the pattern to be machined out of four-quarter lumber. The intricate supporting profile is composed of 19/64" wide by 17/64" tall perpendicular lines connected to a 7/16" semicircular arc with a 3/32" vertical drop on the top left, merged with a 57/64" cove and a 21/64" wide by 1/2" tall notch for inserting a piece of rope mould or another type of decorative insert in the center. It's connected to a 1/4" broad line segment and an 11/32" quarter round bead with a 9/64" vertical drop in elevation, creating the ovolo, joined to a 45/64" cavetto with a 15/64" broad area on the bottom right side of the design. The spring angles are fixed at forty-five degrees, these explicit back bevels keep the inner portion of the profile parallel to the wall and ceiling when installed, they also set the positioned height at 3-7/16" tall with a projection of 3-9/32" wide.