Crown 4-3/4" - 10

This attractive 4-3/4" - 10 crown mould measures 4.750" wide by .750" thickness, allowing a five-inch blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial moulder. The stylish profile composes a graceful two-tangent radius cyma recta in the center, flanked by a 17/64" tall vertical fillet and a 33/64" radius quarter circle on the top left. The lower portion retains a 9/32" tall vertical fillet joined to an ovolo and a 5/8" wide horizontal fillet at the design's bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed. These specific angles lock in the positioned height at 3-9/32" tall with a 3-1/2" projection across the top.