WM 47 Crown 4-5/8" - 8

This WM 47 crown 4-5/8" - 8 measures 4.625" in width by .687" in thickness. The standard terminating profile consists of a two-tangent radius cyma recta flanked by a 9/16" vertical segment above and a 9/32" tall line below. It attaches to an 11/16" radius cove with a 13/64" broad horizontal line on the design's bottom right corner. The spring angles are fixed at thirty-eight and fifty-two degrees; these particular back bevels keep the inner profile parallel to the wall and ceiling and set the installed height at 3-21/32" tall with a projection of 2-13/16" across the top. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 4-7/8" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. You may only need blades for a specific cutter head on the itemized costs, saving money by employing knives you already own. On most of our crown designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.