Crown 4-5/8" - 2

This traditional 4-5/8" - 2 crown mould measures 4.637" width by .750" thickness, permitting the use of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The common terminating pattern is perhaps the most widely used profile in the moulding industry; it contains a 1/2" vertical line on the top left. The line segment connects to a two tangent radius cyma recta with a 3/8" tall line and a 9/16" cove with a 21/64" broad line on the bottom right side of the design. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 3-11/16" tall with a projection of 2-13/16" across the top.