Crown 4-5/8" - 11

This concave 4-5/8" - 11 crown mould measures 4.640" width by .750" thickness, allowing 4-7/8" wide blanks of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The stunning terminating detail contains a 21/64" vertical line segment connected to a 9/32" by 9/32" perpendicular notch on the top left. The squared lines join to a 2-11/16" cavetto in the center, attached to a 33/64" ovolo flanked by a horizontal and vertical line segment with a 23/64" broad line on the bottom right corner of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 3-3/16" tall with a projection of 3-3/8" across the top.