Crown 4-1/2" - 37

This multi-bead 4-1/2" - 37 crown mould measures 4.509" width by .750" thickness, permitting the use of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The reeded supporting pattern contains five quarter-round semicircles in the upper left. The beads join a 1-7/64" cove flanked by a vertical and horizontal line segment in the center and a 7/16" ovolo with two sets of stepped perpendicular lines on the design's bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 3-3/16" tall with a projection of 3-3/16" across the top.

Ever notice why some millwork looks better than other trim patterns in homes, offices, and older buildings? You may want to review our article on knife marks per inch. Read about how machine feed rates and rpm of cutter heads can directly determine the quality of the products you produce. Following or exceeding industry standards will allow your company to lead the way in milling artisanship.