Crown 4-1/2" - 3

This beautiful 4-1/2" - 3 crown mould measures 4.514" width by .812" thickness, allowing the use of four-quarter lumber for machining sprung (laying horizontally flat) on a commercial-grade molder. The elegant supporting pattern contains an 11/32" quarter round bead joined to a 5/32" tall vertical line segment on the top left. The center retains a 2-17/64" cove merged with a 17/64" horizontal fillet attached to a two tangent radius ogee with a 21/64" flat line on the bottom right side of the design. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the exposed face side of the profile parallel to the wall and ceiling when installed, and set the oriented height at 3-17/32" tall with a projection of 2-13/16" across the top.