Crown 4-15/32"

This opulent 4-15/32" supporting crown mould comprises a 25/64" quarter round and a 7/32" vertical segment on the top left. The center retains shallow a cyma recta merged with a 15/64" vertical line attached to a 15/32" cove with a 5/32" broad segment on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 3-3/16" tall with a 3-1/8" projection across the top. The pattern measures 4.468" in width by .687" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 4-3/4" wide. We offer another profile close to this size with similar design characteristics you may want to review and consider; crown mould 4.437" - 4.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.