Crown 4-7/16" - 6

This traditional 4-7/16" - 6 crown mould measures 4.437" wide by .812" thickness, permitting the detail to be machined out of four-quarter lumber. The standard profile is composed of a 19/32" tall vertical line on the top left, connected to a unique three tangent radius cyma recta in the center, joined to a 19/64" tall line and a 39/64" cove with a 21/64" wide flat line at the bottom of the design. The spring angles are fixed at forty-five degrees, these explicit back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 3-9/32" tall with a projection of 3" wide. We have an alternative profile in the same width but with different inner dimensions for your review and consideration, crown 4.437" - 9.