Crown 4-3/8" - 22

This concave crown mould 4-3/8" - 22 measures 4.375" width by .812" thickness, requiring a 4-5/8" wide blank of four-quarter lumber for machining sprung (laying horizontally flat on an industrial moulder. The symmetrical terminating pattern comprises a 2-5/64" cove in the center. A thirty-degree angled line flanks it joined to a graceful ogee with 1/4" vertical & horizontal segments in the upper left and lower right corners of the pattern. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 3-3/32" tall with a 3-3/32" projection across the top. We offer a larger matching pattern at 8-1/4" for your review and consideration, crown 8.250" - 5.