Crown 4-5/16"

This innovative 4-5/16" crown mould measures 4.312" wide by .812" thickness. The concave-shaped profile is comprised of a 2-25/32" radius cove in the center, attached to a 13/32" tall vertical fillet at the top, the lower portion of the profile consists of a two tangent radius cyma reversa/ogee flanked by a 3/32" wide horizontal fillet above and a 1/4" broad flat line below. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific back angle positions lock the installed height at 3-3/32" tall with a 3" projection across the top. The pattern measures 4.312" in width by .812" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 4-9/16" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.