Crown 4-9/32" - 7

This fascinating 4-9/32" - 7 crown mould measures 4.279" width by .812" thick, requiring a 4-1/2" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial moulder. The embellished terminating profile comprises a 7/32" vertical line joined to a two tangent radius s-shaped curvature on the top left. The cyma recta joins a 5/32" vertical line merged with a 9/32" cove in the center. The lower half of the pattern retains a 31/64" wide by 13/16" tall notch for inserting decorative rope or dentil moulding. The design's bottom right side contains a graceful ogee flanked by horizontal fillets. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 3-9/32" tall with a 2-3/4" projection across the top.