Crown 4-1/4" - 6

This custom 4-1/4" - 6 crown mould measures 4.250" wide by .750" thickness, allowing the pattern to be milled from four-quarter lumber. The elegant profile is comprised of an ovolo in the upper portion, it consists of a 41/64" vertical line squared to a 5/16" broad area, connected to a 1-53/64" radius arc and a 5/16" by 15/64" broad squared line, attached to a two tangent radius cyma reversa with a 5/16" horizontal segment at the bottom of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 3-7/16" tall with a projection of 2-1/2" wide.