Crown 4-1/4" - 43

This delightful 4-1/4" - 43 crown mould measures 4.243" width by .812" thickness, permitting the detail to be machined sprung (laying horizontally flat) out of four-quarter lumber on an industrial molder. The decorative terminating profile contains a 1/4" tall vertical line segment, connected to an s-shaped curvature tangent to a tall line on the top left. This section joins a graceful two-tangent radius cyma recta in the center with a 17/64" vertical line merged to a 5/16" cove and a 1/4" horizontal fillet on the bottom right side of the pattern. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed, they also lock in the positioned height at 3" tall with a projection of 3" across the top. .