Crown 4-1/4" - 31

This fashionable 4-1/4" - 31 crown mould measures 4.242" width by .750" thickness, enabling the use of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The stylish terminating profile contains an 11/32" vertical line on the top left, joined to a 1-3/16" concave semicircle tangent off of a 1-15/32" convex arc creating the elegant cyma recta in the center. The end of the s-shaped curvature is attached to a 1/2" tall vertical by 19/32" broad perpendicular lines on the bottom right side of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed, they also lock in the positioned height at 3" tall with a projection of 3" across the top.

Ever notice why some millwork looks and feels better than other trim patterns in homes, offices, and older buildings? You may want to review our article on knife marks per inch. Read about how machine feed rates and rpm's of cutter heads can directly determine the quality of the products you produce. Following or exceeding industry standards will allow your company to lead millwork artisanship.