Crown 4-1/4" - 23

This creative 4-1/4" - 23 crown mould measures 4.250" wide by .750" thickness, permitting the pattern to be machined sprung (laying horizontally flat) out of four-quarter lumber. The astounding terminating profile is composed of a 1/4" vertical fillet on the top left, connected to a beautiful two tangent radius cyma recta with a 9/32" vertical line in the center, attached to a 3/8" cove and a 3/8" wide by 1/2" tall perpendicular notch for rope or dentil moulding, joined to a 7/64" flat line merged with a small ogee and a 1/4" horizontal fillet on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the exposed face side of the profile parallel to the wall and ceiling when installed, as well as set the oriented height at 3-5/16" tall with a projection of 2-21/32" wide.