Crown 4-1/16" - 3

This gorgeous 4-1/16" - 3 crown mould measures 4.063" wide by .750" thickness, permitting the detail to be machined sprung (laying horizontally flat) from four-quarter lumber. The ornate profile is composed of a 5/16" tall vertical line on the top left, attached to a beautiful two tangent radius cyma recta with a small vertical line and 7/32" cove in the center, connected to a 17/64" wide by 13/16" tall perpendicular notch for applying a piece of dentil or rope mould, merged with a decorative 3/16" cove and a 7/32" half round bead with an 11/64" tall by 21/64" broad squared lines at the bottom of the design. The spring angles are fixed at thirty-five and fifty-five degrees, these back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 3-9/32" tall with a projection of 2-13/32" wide.