Crown 4-1/16" - 11

This decorative 4-1/16" - 11 crown mould measures 4.022" wide by .750" thickness, enabling the detail to be cut sprung (laying horizontally flat) out of four-quarter lumber. The beautiful terminating profile is composed of a 21/64" vertical line on the top left, connected to a 17/64" wide by 17/64" tall perpendicular notch joined to an elegant two tangent radius cyma recta in the center, merged with a 21/64" vertical line with a 1/2" radius cove and a 1/4" horizontal segment at the bottom of the design. The spring angles are fixed at forty-five degrees, these explicit back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 2-7/8" tall with a projection of 2-13/16" across the top.