Crown 4" - 60

This custom 4" - 60 crown mould measures 4.000" width by .937" thickness, requiring the use of five-quarter lumber to be machined sprung (laying horizontally flat) on a commercial-grade molder. The fancy terminating profile contains an 11/64" tall vertical fillet on the top left, attached to graceful cyma recta that join to two perpendicular line segments connected to a 1-61/64" concave semicircular arc in the center. Joined to a teardrop-shaped bead merged to a tine vertical line with three various size coves with an 11/64" horizontal line at the bottom right side of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed, they also lock in the positioned height at 2-25/32" tall with a projection of 2-7/8" across the top.