Crown 4" - 39

This lovely 4" - 39 crown mould measures 4.000" wide by .813" thickness, enabling the pattern to be machined out of four-quarter lumber. The elegant supporting profile is composed of a 1/2" quarter round bead joined to a 1/8" vertical line segment on the top left. Connected to a graceful two tangent radii elliptical-shaped concave semicircular area in the center. Attached to a teardrop-shaped half-round and an 11/64" vertical fillet, merged with an 11/64" cove and a 1/4" broad flat line on the bottom right side of the design. The spring angles are at forty-five degrees, these explicit back bevels keep the face side of the profile parallel to the wall and ceiling when installed, they also lock in the positioned height at 2-25/32" tall with a projection of 2-7/8" wide.