Crown 3-7/8" - 4

This 3-7/8" - 4 cyma recta crown mould measures 3.875" wide by .750" thickness. The profile is comprised of a cyma recta in the center flanked by a vertical fillet on top and a 1/2" tall by 1/2" wide stepped fillet at the bottom. The spring angles are fixed at thirty-eight and fifty-two degree, this sets the installed height at 3" tall with a projection of 2-15/32" wide. Two high points in the design are intentionally placed on the same level plane for superior hold-down conditions while milling the pattern. The belly of the cyma recta is purposely recessed below the high points of the design to eliminate any possible burnish mark that may have been caused by the machine pressure shoe element during the milling process.