Crown 3-17/32" - 6

This beautifully designed 3-17/32" - 6 crown mould measures 3.531" wide by .813" thickness, allowing the detail to be milled sprung (laying horizontally flat) out of four quarter lumber. The supporting concave profile is composed of a 23/64" quarter round arc with a 3/16" vertical line at the top left, connected to a 1-27/32" radius cove in the center, joined to two decorative 1/4" tall semicircular beads with a 9/64" tall by 5/32" wide perpendicular lines at the bottom of the design. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at an identical dimension of 2-1/2" tall and wide.