Crown 3-3/8" - 19

This beautiful 3-3/8" - 19 concave crown mould measures 3.399" wide by .750" thickness, allowing the pattern to be machined sprung (laying horizontally flat) out of four quarter lumber. The attractive terminating profile is composed of a 1/4" tall vertical line segment on the top left, attached to a 5/16" wide by 5/16" tall perpendicular notch that joins to a 1-17/32" radius cove in the center, connected to a 7/32" wide by 5/16" tall rabbet with a 1/4" wide horizontal line at the bottom right side of the design. The spring angles are fixed at thirty-five and fifty-five degrees, these precise back bevels keep the inner sections of the profile parallel to the wall and ceiling as well as set the installed height at 2-3/4" tall with a projection of 2" wide.