Crown 3-5/16" - 7

This symmetrical 3-5/16" - 7 crown mould measures 3.314" width by .687" thickness, requiring a 3-9/16" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The striking terminating profile comprises a 1-53/64" convex semicircle in the center. The top left and bottom right corners retain a 15/64' cove flanked by small vertical and horizontal line segments. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 2-11/32" tall with a 2-11/32" projection across the top.