Crown 3-5/16" - 4

This striking 3-5/16" - 4 crown mould measure 3.314" width by .687" thickness, requiring a 3-9/16" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The elegant terminating profile comprises an 11/64" tall line connected to a small cymatium joined to a 3/32" vertical fillet on the top left. The center retains a 1-1/16" cove attached to a 25/64" ovolo with a 15/64" broad flat line on the bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 2-5/16" tall with a 2-3/8" projection across the top.

Do you ever wonder why certain wood species have tear-out problems during milling? Find out more about reducing and eliminating these issues by changing the cutter head hook angle on the knives. Consider purchasing 12/20 degree duel angle cutter heads; this will save a substantial amount of money when investing in this style of tooling.