Crown 3-1/4" - 9

This creative 3-1/4" - 9 terminating crown mould comprises a 1/4" tall by 1/8" broad perpendicular lines on the top left. It connects to a 1" radius convex arc with a 3/8" elevated flat segment in the center. The lower portion retains a 1" radius cavetto with a 1/4" flat area on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 2-3/8" tall with a 2-1/4" projection across the top. The pattern measures 3.270" in width by .750" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 3-1/2" wide. We offer another profile with similar design characteristics in a larger width for your review and consideration, crown mould 3.718".

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.