Crown 3-1/4" - 35

This sumptuous 3-1/4" - 35 crown mould measures 3.250" width by .687" thickness, allowing the use of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial-grade molder. The lavish terminating profile contains a 5/16" tall vertical line on the top left. The vertical fillet joins a 7/16" quarter round convex arc to a 1/4" tall segment, creating the asymmetrical ovolo merged with a 31/32" radius concave semicircle in the center. The remaining portion of the pattern consists of a 1/8" horizontal fillet joined to a two tangent radius ogee with a 7/32" flat line on the design's bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 2-5/16" tall with a projection of 2-9/32" across the top.