Crown 3-1/4" - 25

This traditional 3-1/4" - 25 crown mould measures 3.271" wide by .750" thickness, requiring the use of a 3-1/2" wide blank of four-quarter lumber for milling sprung (laying horizontally flat on an industrial molder. The customary profile contains a 19/64" vertical line segment on the top left. The tall line merges with a free-flowing two-tangent radius cyma recta in the center. It's joined to a 7/32" vertical fillet with a 13/32" cove and a 19/64" flat line on the designs bottom right side. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed. These specific angles also lock in the positioned height at 2-5/16" tall with a 2-5/16" projection across the top.

Are you looking to become more efficient in your current milling production? Please read our commentary on milling production tips, these clever suggestions were written to help you save time and money on a daily task. If you have any questions or concerns about knife grinding procedures for any of our profiles, please contact us, we would be honored to assist you.