Crown 3-3/16" - 6

This fashionable 3-3/16" - 6 crown mould measures 3.204" width by .750" thickness, enabling the detail to be machined sprung (laying horizontally flat) out of four-quarter lumber on an industrial molder. The concave terminating profile contains a 29/64" tall vertical line segment on the top left, connected to a 1-1/2" radius cove in the center. This semicircular arc merges with a 17/64" flat line and a 41/64" convex quarter-round arc at the bottom right side of the pattern. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed, they also lock in the positioned height at 2-9/32" tall with a projection of 2-1/4" across the top.