Crown 3-5/32" - 2
Crown 3-5/32" - 2
This elegant 3-5/32" - 2 terminating crown mould comprises a 1/2" tall vertical fillet on the top left. It connects to two 3/4" tangent semicircles creating the cyma recta in the center. The lower right-hand corner on the bottom retains a 3/8" tall half-round bead. The fixed spring angles are at thirty-six and fifty-four degrees and are included in the downloadable dxf file below. These particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 2-5/16" tall with a 2-3/16" projection across the top. The pattern measures 3.156" in width by 1.000" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using five-quarter lumber is 3-7/16" wide.
The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes.
Moulding Knife Calculator
Grade of Steel
Subtotal
+ Custom Moulding Template
Total (Template + 2 Knives)
V2+RW
chrome coated 72rc face, best seller,
great tool life
$0.00
$0.00
$0.00
Black Nitride
black nitride case hardened
72rc, medium size runs
$0.00
$0.00
$0.00
Endurance
chrome and diamond coated, longest
tool life
$0.00
$0.00
$0.00
Note: If you’re experiencing trouble printing to Full Scale, Go to File,
Print Preview. Change the “Shrink to Fit” option to 100%
Right Cutter Head
Thickness: 1.250
Depth of Cut: 0.720
Left Cutter Head
Thickness: 1.250
Depth of Cut: 0.311
Top Cutter Head
Width: 3.187
Depth of Cut: 0.786
Bottom Cutter Head
Width: 0.000
Depth of Cut: 0.000
Grades of Steel
Price Per Cutter Head - Includes Template & Two Knives
V2+RW
chrome coated 72rc face, best seller
great tool life
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
Black Nitride
black nitride case hardened 72rc
medium size runs
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
Endurance
chrome and diamond coated
longest tool life
Right Cutter Head:
Left Cutter Head:
Top Cutter Head:
Bottom Cutter Head:
© Copyright 1997 - 2024 Mirror Reflections Inc. All Rights Reserved.