Crown 3" - 21

This beautiful 3" - 21 crown mould measures 3.000" wide by .750" thickness, enabling the detail to be machined sprung (laying horizontally flat) out of four-quarter lumber. The classy profile is comprised of a 1/2" tall vertical line on top, attached to a two tangent radius cyma recta in the center, joined to a 5/8" tall vertical line for applying a decorative rope or dental inlay, connected to a 1/2" radius cove with a 15/64" wide horizontal line at the bottom of the pattern. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 2-25/64" tall with a projection of 1-13/16" wide.

We offer a couple of other similar crown designs with a 3/4" and 13/16" tall area for dentil and rope for your review and consideration, crown 3.000" - 22 and crown 3.000" - 23. Be sure to check out a few other profile designs for different rooms in your beautifully stylish home, with over 15,000 patterns in our search by size moulding catalog, there is something for everyone’s creative architectural style. Utilize our manufacturers map listed by states to help you locate a mill in your area to produce this lovely pattern.