Crown 2-7/16" - 6

This magnificent 2-7/16" - 6 crown mould measures 2.431" width by .750" thickness, requiring a 2-11/16" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial moulder. The beautiful supporting profile comprises a 3/8" quarter-round arc with a 5/32" vertical line on the top left. The small line connects to the graceful cyma recta created from two 9/16" semicircles in the center. The curvature joins a 1/4" tall by 9/32" perpendicular lines on the bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 1-3/4" tall with a 1-11/16" projection across the top.