Crown 2-3/8"

This elegant 2-3/8" terminating crown mould comprises a 5/8" tall vertical line segment on the top left. It connects a 9/16" concave semicircle tangent to a 1/2" convex arc. It forms the graceful cyma recta in the center with a 1/4" tall by 3/4" broad set of perpendicular lines on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 1-5/8" tall with a 1-3/4" projection across the top. The pattern measures 2.387" in width by .750" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 2-5/8" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.