Crown 2-5/16" - 2

This petite 2-5/16" - 2 crown mould measures 2.312" in width by .750" in thickness, requiring 2-9/16" wide blanks of four-quarter lumber for machining sprung (laying horizontally flat) on a commercial moulder. The attractive profile composes an 11/64" vertical line segment connected to a 1/8" wide by 1/8" tall notch on the top left. The rabbet merges with a 31/32" cove in the center, joined to a 35/64" tall half-round circle with a 9/64" high by 5/32" broad perpendicular lines on the design's bottom right corner. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 1-41/64" tall with a projection of 1-5/8" wide.