Cove Moulding 6-3/4"

This large cove molding 6-3/4" measures 6.762" width by1.250" thickness, requiring the use of a seven-inch wide blank of six quarter lumber for milling sprung (laying horizontally flat) on an industrial-grade molder. The symmetrical terminating profile contains a 6-11/16" concave semicircular arc in the center, flanked by an 11/16" tall fillet on the upper left, and an 11/16" wide horizontal line on the design's bottom right. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-25/32" tall with a projection of 4-25/32" across the top.

All cad (computer-aided design) files contain important moulder setup and grinding information all designed to help you save time and money in the production process. Thanks for allowing us to help enhance a home's exquisite architectural details, one astonishingly gorgeous profile at a time.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 6.750" / Depth of Cut = .651" (top knives).

Thickness = 1.250" / Depth of Cut = .776" (right blades) & .776" (left cutters).