Cove Moulding 4-1/2" - 5

This cove/crown moulding 4-1/2" - 5 measures 4.500" in width by .812" in thickness, requiring 4-3/4" wide blanks of four-quarter lumber for milling sprung (laying horizontally flat) an industrial moulder. The symmetrical terminating profile comprises a 3-13/16" radius cavetto in the center, connected to a 1/2" tall vertical line on the top left and a 1/2" broad horizontal line at the bottom right corners of the design. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at an identical dimension of 3.187" tall and wide.

For knife quoting purposes, click the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart and place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.

Width = 4.500" / Depth of Cut = .500" (top knives).

Thickness = .812" / Depth of Cut = .477" (right blades) & .477" (left cutters).