Cove 3-1/4" - 1

This decorative 3-1/4" - 1 cove mould measures 3.250" wide by .750" thickness, enabling the detail to be machined sprung (laying horizontally flat) out of four-quarter lumber. The symmetrical concave profile is composed of a 1-29/32" radius cove in the center, attached to an 11/16" tall and wide line segment at the top and bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height & projection at an identical dimension of 2-5/16" tall and wide.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process, the knives will be capable of milling some of the finest quality architectural millwork you have ever produced.