Cove Moulding 2-1/2" - 7

This small lovely cove moulding 2-1/2" - 7 measures 2.488" wide by .563" thickness, allowing the pattern to mill sprung (laying horizontally flat) out of resawn six, or solid four-quarter lumber. The beautiful terminating profile composes a 5/16" tall vertical line on the top left, attached to a 2-7/64" concave semicircle in the center with a 3/16" wide flat line segment on the design's bottom right side. The spring angles were fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 1-15/16" tall with a projection of 2-1/2" wide.

Utilize any of our user-friendlyprofiles, all professionally designed by an accomplished draftsman/toolmaker with over forty years experience in woodworking and a former Weinig field service technician. From just an idea in one's mind to reality in their home, our custom profiles reflect the creative style of your imagination; let us assist you in complementing the architectural decor of any room with any one or more of our attractive molding patterns.

For knife quoting purposes, click to open the calculator below; we supplied only the important measurements; please enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.500" / Depth of Cut = .319" (top knives).

Thickness = .563" / Depth of Cut = .294" (right blades) & .432" (left cutters).